Integrated Circuit

Product Details:

FEATURES: 1. This product is available in AEC-Q101 Compliant and PPAP Capable also.
Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering.
APPLICATIONS: General Purpose Amplifier and Switching Applications

Additional Information:

• Item Code: 2N6292
• Delivery Time: IMMEDIATE
• Packaging Details: 250PCS AMMO PACK

Product Details:

NPN General Purpose Transistors

GENERAL DISCRIPTION:
PNP complements: BC856, BC857 and BC858

FEATURE:
1. Low current (max.100mA)
2. Low voltage (max. 65V)
3. This product is available in AEC-Q101 Qualified and PPAP Capable also. Note: For AEC-Q101 qualified products, please use suffix -AQ in the part number while ordering.

Product Details:

2.5 Amp Output Current IGBT Gate Drive Optocoupler

Features

•2.5 A maximum peak output current
• 2.0 A minimum peak output current
• 25 kV/µs minimum Common Mode Rejection (CMR) at VCM = 1500 V
• 0.5 V maximum low level output voltage (VOL) Eliminates need for negative gate drive
• ICC = 5 mA maximum supply current
• Under Voltage Lock-Out protection (UVLO) with hysteresis
• Wide operating VCC range: 15 to 30Volts
• 500 ns maximum switching speeds
• Industrial temperature range: ‑40°C to 100°C

Product Details:

TL07xx Low-Noise FET-Input Operational Amplifiers


1 Features• High slew rate: 20 V/μs (TL07xH, typ)• Low offset voltage: 1 mV (TL07xH, typ)• Low offset voltage drift: 2 μV/°C• Low power consumption: 940 μA/ch (TL07xH, typ)• Wide common-mode and differentialvoltage ranges– Common-mode input voltage rangeincludes VCC+• Low input bias and offset currents• Low noise:Vn = 18 nV/√Hz (typ) at f = 1 kHz• Output short-circuit protection• Low total harmonic distortion: 0.003% (typ)• Wide supply voltage:±2.25 V to ±20 V, 4.5 V to 40 V2 Applications• Solar energy: string and central inverter• Motor drives: AC and servo drive control andpower stage modules• Single phase online UPS• Three phase UPS• Pro audio mixers• Battery test equipment

Product Details:

QUADRUPLE OPERATIONAL AMPLIFIER


2-kV ESD Protection for:− LM224K, LM224KA− LM324K, LM324KA− LM2902K, LM2902KV, LM2902KAV
Wide Supply Ranges− Single Supply . . . 3 V to 32 V(26 V for LM2902)− Dual Supplies . . .
1.5 V to
16 V(
13 V for LM2902)
Low Supply-Current Drain Independent ofSupply Voltage . . . 0.8 mA Typ
Common-Mode Input Voltage RangeIncludes Ground, Allowing Direct SensingNear Ground
Low Input Bias and Offset Parameters− Input Offset Voltage . . . 3 mV TypA Versions . . . 2 mV Typ− Input Offset Current . . . 2 nA Typ− Input Bias Current . . . 20 nA TypA Versions . . . 15 nA Typ
Differential Input Voltage Range Equal toMaximum-Rated Supply Voltage . . . 32 V(26 V for LM2902)
Open-Loop Differential VoltageAmplification . . . 100 V/mV Typ
Internal Frequency Compensation

Product Details:

20V N-Channel Enhancement Mode MOSFET 

Features
Advanced trench process technology
High Density Cell Design For Ultra Low On-Resistance 

Application
Load Switch
Switching circuits
High-speed line driver
Power Management Functions

Product Details:

SN65HVD1050 EMC Optimized CAN Bus Transceiver


1 Features 3 DescriptionThe SN65HVD1050 meets or exceeds the1• Improved Replacement for the TJA1050 specifications of the ISO 11898 standard for use in• High Electromagnetic Immunity (EMI) applications employing a Controller Area Network• Very Low Electromagnetic Emissions (EME) (CAN).• Meets or Exceeds the Requirements of As a CAN transceiver, this device provides differentialISO 11898-2 transmit capability to the bus and differential receive• CAN Bus-Fault Protection of –27 V to 40 V capability to a CAN controller at signaling rates up to1 megabit per second (Mbps) (1).• Dominant Time-Out FunctionThe SN65HVD1050 is designed for operation in• Power-Up and Power-Down Glitch-Free CAN Busespecially harsh environments. As a result, the deviceInputs and Outputs features cross-wire, overvoltage and loss of ground– High Input Impedance With Low VCC protection from –27 V to 40 V, overtemperature– Monotonic Outputs During Power Cycling shutdown, a –12-V to 12-V common-mode range, andwill withstand voltage transients from –200 V to 200 V2 Applications according to ISO 7637.• Industrial Automation Device Information(1)– DeviceNet™ Data Buses (Vendor ID #806) PART NUMBER PACKAGE BODY SIZE (NOM)• SAE J2284 High-Speed CAN Bus for Automotive SN65HVD1050 SOIC (8) 4.90 mm × 3.91 mmApplications (1) For all available packages, see the orderable addendum at• SAE J1939 Standard Data Bus Interface the end of the data sheet.• ISO 11783 Standard Data Bus Interface (1) The signaling rate of a line is the number of voltagetransitions that are made per second expressed in the units• NMEA 2000 Standard Data Bus Interface 

Product Details:

3-Terminal 1A Positive Voltage Regulator

GENERAL DESCRIPTION: The CL7812DT series of three terminal positive regulators are available in the TO‐252(DPAK) package and  with several fixed output voltages, making them useful in a wide range of applications. Each type employs  internal current limiting, thermal shut down and safe operating area protection, making it essentially  indestructible. If adequate heat sinking is provided, they can deliver over 1.0A output current. Although  designed primarily as fixed voltage regulators, these devices can be used with external components to  obtain adjustable voltages and currents

Product Details:

LOW POWER DISSIPATION:ICC = 4mA(MAX.) at TA=25°Cn LOGIC LEVEL TRANSLATION TO ENABLE5V LOGIC SIGNAL TO COMMUNICATEWITH ±5V ANALOG SIGNALn LOW "ON" RESISTANCE:70W TYP. (VCC - VEE = 4.5V)50W TYP. (VCC - VEE = 9V)n WIDE ANALOG INPUT VOLTAGE RANGE:±6Vn FAST SWITCHING:tpd = 15ns (TYP.) at TA = 25 °Cn LOW CROSSTALK BETWEEN SWITCHESn HIGH ON/OFF OUTPUT VOLTAGE RATIOn WIDE OPERATING SUPPLY VOLTAGERANGE (VCC - VEE) = 2V TO 12Vn LOW SINE WAVE DISTORTION:0.02% at VCC - VEE = 9Vn HIGH NOISE IMMUNITY:VNIH = VNIL = 28 % VCC (MIN.)n PIN AND FUNCTION COMPATIBLE WITH74 SERIES 4052

Product Details:

PNP TRANSISTORS IN TO92 PACKAGE

FEATURES:
1. This product is available in AEC-Q101 Compliant and PPAP Capable also.

Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering. APPLICATION: For switching and AF amplifier application

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: STRIP PACK

Product Details:

3-TERMINAL PROGRAMMABLE SHUNT REGULATOR

FEATURES :
1) Output Voltage can be adjusted to 36V
2) Low dynamic output impedance, its typical value is 0.2
3) Trapping current capability is 1 to 100mA
4) Typical value of the equivalent temperature factor in the whole temperature scope is 50ppm/°C
5) The effective temperature compensation in the working range of full temperature
6) Low output noise voltage
7) Fast on-state response

Product Details:

CD74HC245BM96 - High-Speed CMOS Logic Octal-Bus Transceiver, Three-State, Non-Inverting


1 Features• Buffered inputs• Three-state outputs• Bus line driving capability• Typical propagation delay (A to B, B to A) 9ns atVCC = 5V, CL = 15pF, TA = 25°C• Fanout (over temperature range)– Bus driver outputs :15 LSTTL loads• Wide operating temperature range : -55°C to125°C• Balanced propagation delay and transition times• Significant power reduction compared to LSTTLlogic ICs

Product Details:

PNP SILICON EPITAXIAL TRANSISTORS

FEATURE
1. This product is available in AEC-Q101 Compliant and PPAP Capable also.
Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering.

APPLICATIONS: This device is designed for general-purpose amplifier and switching applications

Product Details:

NPN General Purpose Transistors

FEATURE:
1. Low current (max.100mA)
2. Low voltage (max. 65V)
3. This product is available in AEC-Q101 Qualified and PPAP Capable also.
Note: For AEC-Q101 qualified products, please use suffix -AQ in the part number while ordering.

Product Details:

SOT-23 Plastic-Encapsulate Transistors

FEATURES 
Complementary to MMBT5401 
Ideal for Medium Power Amplification and Switching 

Product Details:

20V P-Channel Enhancement Mode MOSFET

Features - 
Trench FET Power MOSFET

APPLICATION - 
Load Switch for Portable Devices 
DC/DC Converter

Product Details:

SMD MOSFET

Features
High dense cell design for extremely low RDS(ON)
Exceptional on-resistance and maximum DC current capability 

Application
 Load/Power Switching
 Interfacing Switching

Product Details:

TLP5214(TP,E - TOSHIBA 

Isolated IGBT/Power MOSFET gate drive AC and brushless DC motor drives Industrial Inverters and Uninterruptible Power Supply (UPS)

The TLP5214 is a highly integrated 4.0A output current IGBT gate drive photocoupler housed in a long creepage and clearance SO16L package. The TLP5214, a smart gate driver photocoupler, includes functions of IGBT desaturation detection, isolated fault status feedback, soft IGBT turn-off, active Miller cramping and under voltage lockout (UVLO). This photocoupler is suitable for driving IGBT and power MOSFET used in inverter applications. The TLP5214 consists two GaAℓAs infrared light-emitting diodes (LEDs) and two high-gain and high-speed ICs. They realize high current, high-speed output control and output fault status feedback.

Product Details:

Features • Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz • -40°C to 85°C/105°C/125°C operating temperature • Memories – Up to 64 Kbytes of Flash memory with protection and securable area – 8 Kbytes of SRAM with HW parity check • CRC calculation unit • Reset and power management – Voltage range: 1.7 V to 3.6 V – Power-on/Power-down reset (POR/PDR) – Programmable Brownout reset (BOR) – Programmable voltage detector (PVD) – Low-power modes: Sleep, Stop, Standby, Shutdown – VBAT supply for RTC and backup registers • Clock management – 4 to 48 MHz crystal oscillator – 32 kHz crystal oscillator with calibration – Internal 16 MHz RC with PLL option (±1 %) – Internal 32 kHz RC oscillator (±5 %) • Up to 44 fast I/Os – All mappable on external interrupt vectors – Multiple 5 V-tolerant I/Os • 5-channel DMA controller with flexible mapping • 12-bit, 0.4 µs ADC (up to 16 ext. channels) – Up to 16-bit with hardware oversampling – Conversion range: 0 to 3.6V • 11 timers (one 128 MHz capable): 16-bit for advanced motor control, one 32-bit and four 16-bit general-purpose, two low-power 16-bit, two watchdogs, SysTick timer

Product Details:

Features • Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz • -40°C to 85°C operating temperature • Memories – Up to 64 Kbytes of Flash memory with protection – 8 Kbytes of SRAM with HW parity check • CRC calculation unit • Reset and power management – Voltage range: 2.0 V to 3.6 V – Power-on/Power-down reset (POR/PDR) – Low-power modes: Sleep, Stop, Standby – VBAT supply for RTC and backup registers • Clock management – 4 to 48 MHz crystal oscillator – 32 kHz crystal oscillator with calibration – Internal 16 MHz RC with PLL option – Internal 32 kHz RC oscillator (±5 %) • Up to 44 fast I/Os – All mappable on external interrupt vectors – Multiple 5 V-tolerant I/Os • 5-channel DMA controller with flexible mapping • 12-bit, 0.4 µs ADC (up to 16 ext. channels) – Up to 16-bit with hardware oversampling – Conversion range: 0 to 3.6V • 8 timers: 16-bit for advanced motor control, four 16-bit general-purpose, two watchdogs, SysTick timer • Calendar RTC with alarm and periodic wakeup from Stop/Standby

Product Details:

3V 32M-BITSERIAL FLASH MEMORY WITHDUAL, QUAD SPI


FEATURES· New Family of SpiFlash Memories– W25Q32JV: 32M-bit / 4M-byte– Standard SPI: CLK, /CS, DI, DO, /WP, /Hold– Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3– Software & Hardware Reset· Highest Performance Serial Flash– More than 100,000 erase/program cycles– Min. 100K Program-Erase cycles per sector– 133MHz Single, Dual/Quad SPI clocks266/532MHz equivalent Dual/Quad SPI· Efficient “Continuous Read”– Continuous Read with 8/16/32/64-Byte Wrap– As few as 8 clocks to address memory– Allows true XIP (execute in place) operation– Outperforms X16 Parallel Flash· Low Power, Wide Temperature Range– Single 2.7 to 3.6V supply– <1μA Power-down (typ.)– -40°C to +85°C operating range

Product Details:

High Power Switching, Hammer Drive, Pulse Motor Drive and Inductive Load Drive 

FEATURES: 1. This product is available in AEC-Q101 Qualified and PPAP Capable also.
Note: For AEC-Q101 qualified products, please use suffix -AQ in the part number while ordering.

APPLICATIONS: High Power Switching, Hammer Drive, Pulse Motor Drive and Inductive Load Drive Applications

Additional Information:

• Item Code: TIP122
• Delivery Time: IMMEDIATE
• Packaging Details: AMMO PACK

Product Details:

SNx5HVD308xE Low-Power RS-485 Transceivers


1 Features• Meets or exceeds the requirements of the TIA/EIA-485A standard• Low quiescent power– 0.3-mA Active mode– 1-nA Shutdown mode• 1/8 Unit load up to 256 nodes on a bus• Bus-pin ESD protection up to 15 kV• Industry-standard SN75176 footprint• Fail-safe receiver (bus open, bus shorted,bus idle)• Glitch-free power-up and power-down bus inputsand outputs2 Applications• Energy meter networks• Motor control• Power inverters• Industrial automation• Building automation networks• Battery-powered applications• Telecommunications equipment

Product Details:

3V 64M-BITSERIAL FLASH MEMORY WITHDUAL, QUAD SPI


FEATURES New Family of SpiFlash Memories– W25Q64JV: 64M-bit / 8M-byte– Standard SPI: CLK, /CS, DI, DO– Dual SPI: CLK, /CS, IO0, IO1– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3– Software & Hardware Reset(1) Highest Performance Serial Flash– More than 100,000 erase/program cycles– Min. 100K Program-Erase cycles per sector– 133MHz Single, Dual/Quad SPI clocks266/532MHz equivalent Dual/Quad SPI Efficient “Continuous Read”– Continuous Read with 8/16/32/64-Byte Wrap– As few as 8 clocks to address memory– Allows true XIP (execute in place) operation– Outperforms X16 Parallel Flash Low Power, Wide Temperature Range– Single 2.7 to 3.6V supply– <1μA Power-down (typ.)– -40°C to +85°C operating range

Product Details:

SILICON EPITAXIAL PLANAR SWITCHING DIODE

FEATURES: 1. Polarity : Colour band denotes cathode end
2. This product is available in AEC-Q101 Compliant and PPAP Capable also.
Note: For AEC-Q101 compliant products , please suffix - AQ in the part number while ordering

APPLICATION: General purpose, Industrial, Military and Space applications. Hermetically sealed glass with a stud on either side of the glass passivated chip provides excellent stability. Extremely low leakage and very high reliability

Additional Information:

• Item Code: 1N4148
• Delivery Time: IMMEDIATE
• Packaging Details: BOX PACK

Product Details:

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

 The plastic package carries Underwriters Laboratory Flammability Classification 94V-0
 For surface mounted applications
 Metal silicon junction,majority carrier conduction
 Low power loss,high efficiency
 Built-in strain relief,ideal for automated placement
 High forward surge current capability
 High temperature soldering guaranteed: 250 °C/10 seconds at terminals

Additional Information:

• Delivery Time: IMMEDIATE

Product Details:

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER


Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0
For surface mounted applications
Metal silicon junction,majority carrier conduction
Low power loss,high efficiency
Built-in strain relief,ideal for automated placement
High forward surge current capability
High temperature soldering guaranteed: 250 °C/10 seconds at terminals

Product Details:

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER


Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0
For surface mounted applications
Metal silicon junction,majority carrier conduction
Low power loss,high efficiency
Built-in strain relief,ideal for automated placement
High forward surge current capability
High temperature soldering guaranteed: 250 °C/10 seconds at terminals

Product Details:

COMPLEMENTARY DARLINGTON PLASTIC POWER TRANSISTORS

APPLICATION:

Designed for General Purpose Amplifier and Low Speed Switching Applications

Product Details:

Features :

1). Glass Passivated Junction Chip2). The Plastic Package has Underwriters Laboratory Flammability Classification 94V-0.3). Low Reverse Leakage4). Built-in Strain Relief, Ideal for Automated Placement.5). High Forward Surge Current Capability.6). High Temperature Soldering : 260°C / 10 seconds at Terminals.7). Colour Band denotes the Cathode end.8). Terminals Solder Plated, Solderable as per MIL-STD-750, Method 20269). Weight : 0.038 grams