Our product range includes a wide range of 2n7000 mosfet transistors cdil to92, mje13005 transistor cdil to220, 5n65 mosfet transistors mot dpak / to252, 10n50 mosfet transistors mot dpak / to252, 15n10 n chanel mosfet mot to252 / dpak and si2310 n channel mosfet mot sot23.
RDS(ON) ≤ 110 mΩ @ VGS=10V,ID=3.0A RDS(ON) ≤ 140 mΩ @ VGS=4.5V,ID=2.0A * High Cell Density Trench Technology * High Power and Current Handling Capability
SOT-23 Plastic-Encapsulate MOSFETS High density cell design for low RDS(ON) Rugged and Relaible Voltage controlled small signal switch High saturation current capability HMB ESD protected (2000V)
FEATURES - * Ultra low gate charge* Low reverse transfer Capacitance* Fast switching capability* Avalanche energy tested* Improved dv/dt capability, high ruggedness
GENERAL DESCRIPTION: Fixed Voltage Regulators, these Device can be used with External Components to obtain Adjustable Output Voltage and Current and also as the Power Pass Element in Precision Regulators
APPLICATION: Industrial Power Supplies, SMPS Post Regulation, HVAC Systems ,AC Inventors ,Test and Measurement Equipment,Brushed and Brush less DC Motor Drivers,Solar Energy String Invertors
Features Core: ARM® 32-bit Cortex™-M0 CPU, frequency up to 48 MHz Memories – 16 to 64 Kbytes of Flash memory – 4 to 8 Kbytes of SRAM with HW parity checking CRC calculation unit Reset and power management – Voltage range: 2.4 V to 3.6 V – Power-on/Power down reset (POR/PDR) – Low power modes: Sleep, Stop, Standby Clock management – 4 to 32 MHz crystal oscillator – 32 kHz oscillator for RTC with calibration – Internal 8 MHz RC with x6 PLL option – Internal 40 kHz RC oscillator Up to 55 fast I/Os – All mappable on external interrupt vectors – Up to 36 I/Os with 5 V tolerant capability 5-channel DMA controller 1 x 12-bit, 1.0 µs ADC (up to 16 channels) – Conversion range: 0 to 3.6 V – Separate analog supply from 2.4 up to 3.6 V Up to 10 timers – One 16-bit 7-channel advanced-control timer for 6 channels PWM output, with deadtime generation and emergency stop – One 16-bit timer, with up to 4 IC/OC, usable for IR control decoding – One 16-bit timer, with 2 IC/OC, 1 OCN, deadtime generation and emergency stop – Two 16-bit timers, each with IC/OC and OCN, deadtime generation, emergency stop and modulator gate for IR contro
Request Callback
Additional Information:
Delivery Time: IMMEDIATE
Yes! I am interested
0805 MLCC MULTI LAYER CERAMIC CHIP CAPACITORS (1PF TO 10UF)
MULTILAYER CERAMIC CAPACITORS General Purpose Series (4V to 100V) 0201 to 1812 Sizes NP0, X7R, Y5V, X6S, X7S & X5R Dielectrics
2. FEATURES a. A wide selection of sizes is available (0201 to 1812). b. High capacitance in given case size. c. Capacitor with lead-free termination (pure Tin).
Component Disposal Instructions 1. CDIL Semiconductor Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental Legislation of their Country. 2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
Features ■ ARM 32-bit Cortex™-M3 CPU Core – 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division ■ Memories – 64 or 128 Kbytes of Flash memory – 20 Kbytes of SRAM ■ Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR, and programmable voltage detector (PVD) – 4-to-16 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration ■ Low power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers ■ 2 x 12-bit, 1 µs A/D converters (up to 16 channels) – Conversion range: 0 to 3.6 V – Dual-sample and hold capability – Temperature sensor
Description The ACPL-331J is an advanced 1.5 A output current, easyto-use, intelligent gate driver which makes IGBT VCE fault protection compact, aff ordable, and easy-to implement. Features such as integrated VCE detection, under voltage lockout (UVLO), “soft” IGBT turn-off , isolated open collector fault feedback and active Miller clamping provide maximum design fl exibility and circuit protection. The ACPL-331J contains a AlGaAs LED. The LED is optically coupled to an integrated circuit with a power output stage. ACPL-331J is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The voltage and current supplied by these optocouplers make them ideally suited for directly driving IGBTs with ratings up to 1200 V and 100 A. For IGBTs with higher ratings, the ACPL-331J can be used to drive a discrete power stage which drives the IGBT gate. The ACPL-331J has an insulation voltage of VIORM = 1230
