We are a leading Authorized Wholesale Dealer of bc847b smd npn transistors, stm8s003f3p6tr smd microcontroler ic, cdil 2n2222 npn silicon planar switching transistors, 2n3773 power transistor, 2n 3055 hv transistors and fr107 fast recovery diode from Mumbai, India.
GENERAL DISCRIPTION: PNP complements: BC856, BC857 and BC858 FEATURE: 1. Low current (max.100mA) 2. Low voltage (max. 65V) 3. This product is available in AEC-Q101 Qualified and PPAP Capable also. Note: For AEC-Q101 qualified products, please use suffix -AQ in the part number while ordering.
Switching And Linear Application DC And VHF Amplifier Applications
FEATURE: 1. This product is available in AEC-Q101 Compliant and PPAP Capable also. Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering.
APPLICATION: Switching And Linear Application DC And VHF Amplifier Applications
Especially suited for Power Conditioning Applications
This storage environment assumes that the Diodes and transistors are packed properly inside the original packing supplied by CDIL. Temperature 5 °C to 30 °C Humidity between 40 to 70 %RH Air should be clean. Avoid harmful gas or dust. Avoid outdoor exposure or storage in areas subject to rain or water spraying . Avoid storage in areas subject to corrosive gas or dust. Product shall not be stored in areas exposed to direct sunlight. Avoid rapid change of temperature. Avoid condensation. Mechanical stress such as vibration and impact shall be avoided. The product shall not be placed directly on the floor. The product shall be stored on a plane area. They should not be turned upside down. They should not be placed against the wall. Shelf Life of CDIL Products The shelf life of products is the period from product manufacture to shipment to customers. The product can be unconditionally shipped within this period. The period is defined as 2 years. If products are stored longer than the shelf life of 2 years the products shall be subjected to quality check as per CDIL quality procedure. The products are further warranted for another one year after the date of shipment subject to the above conditions in CDIL original packing
NOTES: 1. Measured at 1MHz and Applied Reverse Voltage of 4.0 VDC 2. Thermal Resistance Junction to Ambient and form Junction to Lead at "0.375" (9.5mm) Lead Length P.C.B Mounted 3. Reverse Recovery Test Conditions : IF = 0.5A, IR = 1A, IRR =0.25A
FEATURES: 1. This product is available in AEC-Q101 Compliant and PPAP Capable also. Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering.
APPLICATIONS: General Purpose Amplifier and Switching Applications
This storage environment assumes that the Diodes and transistors are packed properly inside the original packing supplied by CDIL. ꞏ Temperature 5 °C to 30 °C ꞏ Humidity between 40 to 70 %RH ꞏ Air should be clean. ꞏ Avoid harmful gas or dust. ꞏ Avoid outdoor exposure or storage in areas subject to rain or water spraying . ꞏ Avoid storage in areas subject to corrosive gas or dust. Product shall not be stored in areas exposed to direct sunlight. ꞏ Avoid rapid change of temperature. ꞏ Avoid condensation. ꞏ Mechanical stress such as vibration and impact shall be avoided. ꞏ The product shall not be placed directly on the floor. ꞏ The product shall be stored on a plane area. They should not be turned upside down. They should not be placed against the wall. Shelf Life of CDIL Products The shelf life of products is the period from product manufacture to shipment to customers. The product can be unconditionally shipped within this period. The period is defined as 2 years. If products are stored longer than the shelf life of 2 years the products shall be subjected to quality check as per CDIL quality procedure. The products are further warranted for another one year after the date of shipment subject to the above conditions in CDIL original packing
Request Callback
Additional Information:
Item Code: 2N6107
Delivery Time: IMMEDIATE
Packaging Details: AMMO PACK
Shelf Life of CDIL Products
The shelf life of products is the period from product manufacture to shipment to customers. The product can
be unconditionally shipped within this period. The period is defined as 2 years.
If products are stored longer than the shelf life of 2 years the products shall be subjected to quality check as
per CDIL quality procedure.
The products are further warranted for another one year after the date of shipment subject to the above
conditions in CDIL original packing.
Floor Life of CDIL Products and MSL Level
When the products are opened from the original packing, the floor life will start.
For this, the following JEDEC table may be referred:
JEDEC MSL Level
Level Time Condition
1 Unlimited ≤30 °C / 85% RH
2 1 Year ≤30 °C / 60% RH
2a 4 Weeks ≤30 °C / 60% RH
3 168 Hours ≤30 °C / 60% RH
4 72 Hours ≤30 °C / 60% RH
5 48 Hours ≤30 °C / 60% RH
5a 24 Hours ≤30 °C / 60% RH
6 Time on Label(TOL) ≤30 °C / 60% RH
2N6292
Rev2_01072022EM
FEATURE: 1. Internal thermal overload protection. 2. Internal short circuit current limit. 3. This product is available in AEC-Q101 Compliant and PPAP Capable also
FEATURE: 1. Internal thermal overload protection. 2. Internal short circuit current limit. 3. This product is available in AEC-Q101 Compliant and PPAP Capable also. Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering
GENERAL DESCRIPTION: The Voltages Available allow these Regulators to be used in Logic Systems, Instrumentation, Hi-Fi Audio Circuits and other Solid State Electronic Equipment
FEATURE: 1. This product is available in AEC-Q101 Compliant and PPAP Capable also. Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering.
APPLICATION: Industrial Power Supplies, SMPS Post Regulation, HVAC Systems ,AC Inventors ,Test and Measurement Equipment,Brushed and Brush less DC Motor Drivers,Solar Energy String Inverters
GENERAL DISCRIPTION: Designed for use as Audio Amplifier and Drivers Utilizing
FEATURE: 1. This product is available in AEC-Q101 Qualified and PPAP Capable also. Note: For AEC-Q101 qualified products, please use suffix -AQ in the part number while ordering.
APPLICATIONS: 1. Driver stages in hi-fi amplifier and television circuit.
FEATURES: 1. CMBT2907 = 2B CMBT2907A = 2F 2. This product is available in AEC-Q101 Compliant and PPAP Capable also. Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering.
FEATURE: 1. Low current (max.100mA) 2. Low voltage (max. 65V) 3. This product is available in AEC-Q101 Qualified and PPAP Capable also. Note: For AEC-Q101 qualified products, please use suffix -AQ in the part number while ordering. Marking BC846 =1D BC846A=1A BC846B=1B BC847 =1H BC847A=1E BC847B=1F BC847C=1G BC848B=1K
FEATURES: 1. Complementary BCP51 BCP52 and BCP53 2. This product is available in AEC-Q101 Compliant and PPAP Capable also. Note: For AEC-Q101 compliant products , please suffix - AQ in the part number while ordering
APPLICATION: General Purpose Medium Power DC Applications
FEATURE: 1. NPN Complements to BCX54,BCX55,BCX56 2. Low Voltage 3. High Current 4. This product is available in AEC-Q101 Qualified and PPAP Capable also. Note: For AEC-Q101 qualified products, please use suffix -AQ in the part number while ordering.
FEATURES: 1. Marking Code is =3Z 2. This product is available in AEC-Q101 Compliant and PPAP Capable also. Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering.
APPLICATION: Designed for Extremely High Voltage Applications
FEATURE: 1. This product is available in AEC-Q101 Compliant and PPAP Capable also. Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering.
2. This product is available in AEC-Q101 Compliant and PPAP Capable also. Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering
2. This product is available in AEC-Q101 Compliant and PPAP Capable also. Note: For AEC-Q101 compliant products, please use suffix -AQ in the part number while ordering
FEATURES: 1. Fast Switching Device (TRR <50nS) 2. Power Dissipation of 250mW 3. High Stability and High Reliability 4. Low reverse leakage 5. Halogen Free moulding compound to be used.
1. This product is available in AEC-Q101 Qualified and PPAP Capable also. Note: For AEC-Q101 qualified products, please use suffix -AQ in the part number while ordering.
Recommended Product Storage Environment for Discrete Semiconductor Devices This storage environment assumes that the Diodes and transistors are packed properly inside the original packing supplied by CDIL. ꞏ Temperature 5 °C to 30 °C ꞏ Humidity between 40 to 70 %RH ꞏ Air should be clean. ꞏ Avoid harmful gas or dust. ꞏ Avoid outdoor exposure or storage in areas subject to rain or water spraying . ꞏ Avoid storage in areas subject to corrosive gas or dust. Product shall not be stored in areas exposed to direct sunlight. ꞏ Avoid rapid change of temperature. ꞏ Avoid condensation. ꞏ Mechanical stress such as vibration and impact shall be avoided. ꞏ The product shall not be placed directly on the floor. ꞏ The product shall be stored on a plane area. They should not be turned upside down. They should not be placed against the wall. Shelf Life of CDIL Products The shelf life of products is the period from product manufacture to shipment to customers. The product can be unconditionally shipped within this period. The period is defined as 2 years. If products are stored longer than the shelf life of 2 years the products shall be subjected to quality check as per CDIL quality procedure. The products are further warranted for another one year after the date of shipment subject to the above conditions in CDIL original packing.
